High performance wooden window production line. New price was 800.000 Euro - now possible to buy very cheap, price on request!
Line can be inspected while producing!
Pos. 1 GUBISCH connected window production line Typ CD-Super, consisting of:
--------------------------------------------------------------------------------------------------------------
1. WEINIG moulder Typ UNIMAT 22 A with 7 spindles, divide out of glazing bead jointer for top and bottom spindles, with automatic width adjustment.
2. transport system
3. HESS sanding machine Typ JUNIOR, sanding from top and bottom
4. transport system
5. transport roller belt ca. 4 m speed variable adjustable
6. trnasport belt for the waste timber
7. GUBISCH double end tenoner Typ CDZ right and left side movable
> working width max. 4.000 mm outside measurement
> working width min. 320 mm + tenon,
> both sides with electronic width positionning with fast adjustment through ball bearing spindles by servo engine
Double end tenoner with following aggregates:
> 2 cut-off saws (1x left, 1 x right), horizontal electronic positionning 30 - 120 mm, including sawblade/rounder combination horizontal adjustable with cut-off saw
> 2 tenoning spindles vertical left
each 11 KW, belt drive
automatic star delta switch
spindle diameter 50 mm
flying cycle diameter 350 mm
spindle lenght 320 mm for free tool placement
adjustment up/down CNC electronic free variable,
forward/backward 240 mm pneumatically
spindle turning approx. 4.000 rpm max.
> 2 tenoning spindles vertical right
each 11 KW, belt drive
automatic star delta switch
spindle diameter 50 mm
flying cycle diameter 350 mm
spindle lenght 320 mm for free tool placement
adjustment up/down CNC electronic free variable,
forward/backward 240 mm pneumatically
spindle turning approx. 4.000 rpm max.
> automatic exit system for the work pieces out of double end tenoner with singelling of the pieces for further processing
8. transport system to profiling station no. 1
9. GUBISCH profiling station Typ CDF 1
> 3 vertical profiling spindles right side
each 9,2 KW, 6.000 rpm,
automatic star delta switch,
brake engine
spindle length 320 mm
spindle diameter 50 mm
flying cycle diameter 112 - 240 mm
vertical adjusment pneumatically for 3 tools (stroke 3 x 100 mm)
> 1 grooving aggregate from top
10. transport system from profiling station no. 1 to station no. 2
11. GUBISCH profiling station Typ CDF 2
> 3 vertical profiling spindles right side
each 9,2 KW, 6.000 rpm,
automatic star delta switch,
brake engine
spindle length 320 mm
spindle diameter 50 mm
flying cycle diameter 112 - 240 mm
vertical adjusment pneumatically for 3 tools (stroke 3 x 100 mm)
> grooving aggregate from top
> Inkjet printer for signing the pieces
12. exit transport system
13. control of the line by SPS control with overlying CNC fieldbus control, possibe for online use
Pos. 2 STEGHERR drilling and dowel inserting centre Type BZ
--------------------------------------------------------------------------------------------------------------
for drilling of imposts, edgecorner, bars and dowel inserting.
working length of machine 4600 mm
working height 220 mm
working width 160 mm
Machine consists of 3 working areas/aggregates.
Detailed technical descriptions, layouts and more pictures you find in the pdf-files next to the description.
(technical details according to manufacturer - without guarantee!)
Возможны изменения и ошибки в технических характеристиках и приведенных данных.
)
)
)
)
)
)
