Données

 Retour    Imprimer

Détails techniques

Informations supplémentaires

Item 1: Okoma UF1 S Angle Combination Unit and
Item 2: UF2 EG Rebating Machine,
incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors,
and IV78 Timber-Aluminum Windows (Gutmann system) with straight and
angled sash profiles

For sale on behalf of a customer
-------------------------------------------------------
Manufacturer's Technical Description:

Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine
---------------------------------
Compact, heavy-duty automatic window machine featuring a cast-iron construction,
consisting of:

Top-mounted cross-cut saw with 12-position turret stop system;
Positive-guided saw guard for accident prevention

Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for
3 tool positions (stroke height: 83 mm); Motor: 7.5 kW

Sliding table: Adjustable on both sides from 0 to 60 degrees
Automatic feed system with various infinitely variable
speed settings; dual pneumatic clamping system;
Length stop (LAS) with 3-position system, 2300 mm capacity

Automatic transfer unit to the profiling section
Profiling spindle: 40 mm diameter x 252 mm length
Pneumatic stroke: 112 mm (adjustable) for 2 tool positions
Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge;
Adjustable front milling fence jaw

Glazing bead saw with 3 kW motor and 4-position turret head adjustment;
Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable,
Roller groups pivotable inward and outward
Counter-stop with 5-position turret head
Frame milling unit
---------------------------------

Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG
-------------------------------------
Power Specifications:
- Operating voltage: 3-phase, 380 V, 50 Hz
- Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar
Conditioned air: According to Pneurop 6611

1. Profiling Spindle 1:
- Spindle arrangement: Right
- Power: 11 kW
- Speed: 7000 rpm
- Direction of rotation: Climb and conventional milling
- Spindle diameter: 50 mm
- Usable length: 272 mm
- Max. tool diameter: 230 mm
- Vertical (U-axis) movement of the profiling spindle
- Vertical positioning:
Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions
Position sensor: Limit switches
- Horizontal positioning:
Actuation: Pneumatic cylinder (forward/backward)
Position sensor: Limit switches
- Automatic plunge mechanism:
Plunge speed adjustable to ensure tear-out-free rebating
- Safety and dust extraction hood with 140 mm diameter connection port

2. Profiling Spindle 2:
- Spindle arrangement: Right
- Power: 11 kW
- Speed: 7000 rpm
- Direction of rotation: Counter-rotation
- Spindle diameter: 50 mm
- Usable length: 272 mm
- Max. tool diameter: 230 mm
- U-axis movement of the profiling spindle
- Vertical positioning:
Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions
Position sensor: Limit switches
- Horizontal positioning:
Drive: Pneumatic cylinder (forward/backward)
Position sensor: Limit switches
- Safety and dust extraction hood with connection port (140 mm diameter)

3. Hardware Routing Unit EG:
- Spindle arrangement: Right
- Drive: 3 kW three-phase motor
- Speed: 6000 rpm
- Spindle diameter: 30 mm
- Usable length: 47 mm
- Vertical positioning: None
- Horizontal positioning:
Drive: Pneumatic cylinder (forward/backward)
Position sensor: Limit switches (rear only)
- Safety and dust extraction hood with connection port (80 mm diameter)

Fence:
- 1st Fence: Located before Spindle 1; manual stock removal adjustment;
quick adjustment via... Parallelogram System
- 2nd Stop: between spindles 1 and 2; stock removal: pneumatically adjustable
- 3rd Stop: after spindle 2; fixed stop

Feed Unit:
- Roller spacing (center-to-center): 130 mm
- Roller diameter: 110 mm
- Roller width: 50 mm
- Feed unit: swing-away design
- With pneumatic working stroke control

Support Rail for Profile Milling:
- Rail length: approx. 3000 mm
- Forward adjustment range: approx. 100 – 600 mm

Electrical Control System:
- Programmable Logic Controller (PLC): Siemens Electronics /
PC-based control; 30 programs; 380 V, 50 Hz
- Power Section: Siemens S5
- Non-contact limit switches
---------------------------------

Item 3: Includes Tooling Set by Gold:
-------------------------------------
IV78 Wooden Windows
IV78 Wooden Entrance Doors
IV78 Wood-Aluminum Windows (Gutmann system) with straight and angled sash profiles
---------------------------------
Price for the above-mentioned machines: On request!
---------------------------------

(Technical specifications provided by the manufacturer – subject to verification!)