Список данных

 Назад    Печатать

Техн.данные станка

Дополнительная информация

Glazing and control press Ruchser RU-VGPA 3
-------------------------------------------------

RU-VGPA3; Glazing and inspection press

Maximum clamping width 3000 mm, minimum 300 mm;
Length 4150 mm, width 900 mm, height 2700 mm,
System height 1900 mm, press beam height 2400 mm.
Clamping beam depth 150 mm.

System section covered with felt.

Installation surface as roller conveyor, roller length and roller spacing 200 mm.

Lifting device from 300 to 800 mm with left
and right lifting cylinder, synchronisation device
consisting of a continuous synchronisation shaft with gear wheels.

Two pneumatically foldable and movable
press beams. Simultaneous, synchronous tilting
and movement of the press beams via a single
foot valve, resulting in minimal time required for
opening and closing the press.
Safety control during pressure build-up.
One roller on the left and right as edge protection
for elements up to 2500 mm in height.
Load capacity 600 kg.
-------------------------------------------------
Price of the above machine: on request!
-------------------------------------------------

Options at extra cost:

Item 1.1 EUR 785.00
System component with rubber rollers, Ø 48 mm, roller spacing 50 mm,
for RU-VGPA3

Item 1.2 EUR 474.00
Steel brackets covered with felt, attached above the roller strips
for RU-VGPA-3(E)
These prevent the windows from ‘rattling’
when sliding. The additional strips
replace the lower roller strips
on system components with double rubber roller strips.

-------------------------------------------------
Total price for this version: on request!
Ex works plus packaging and shipping, plus statutory VAT.

(Technical data according to manufacturer – no guarantee!)
-------------------------------------------------