Engelfried Maschinentechnik GmbH
Tel.: +49 (7361) 9866-0
Предложение в детялях | |
Инвентарный номер | 1305-6857 |
Тип оборудования | 4 side moulder |
Производитель | WEINIG |
Тип | Powermat 600 Fenster |
Год производства | neuwertig |
Тип управления | CNC |
Место нахождения | Oberkochen |
Страна происхождения | Germany |
Срок поставки | ca.August 24 |
Условия отгрузки | ex warehouse |
Number of spindles | 5 St. |
Working width | 230 mm |
Working height | 120 mm |
Length of the planing table | 2500 mm |
Feed motor | 4 kW |
Feed speed | 5-30 m/min. |
Control | Weinig, MemoryPlus |
Weinig Powermat 600 with HSK/Powerlock, axial/radial CNC controlled
--------------------------------------------------
Machine is being checked
Short summary:
--------------------------------------------------
5 spindles with 8,000 rpm
4 x HSK/Powerlock
Axial and radial CNC adjustment of the spindles via control
CNC - controlled adjustment and positioning of the feed
Detailed description:
--------------------------------------------------
Technical data:
Working width: 20-230 mm
Working height: 10 -120 mm
Number of spindles: 5
1. Tool holder - bottom
-----------------------------------------------
Motor with brake: 5.5 kW
Spindle diameter: 40mm
Speed: 6,000 rpm
Tool flight circle: 125 - 145 mm
Tool flight circle rebate cutter: 130 - 160 mm
Axial adjustment path: 5 mm
Folding device
MarathonCoatin for table insert in front of 1st lower tool holder
2. Tool holder - PowerLock - right
-----------------------------------------------
Motor with brake: 11.0 kW
Common motor with left tool holder
Speed including high-performance ball bearings: 8,000 rpm
Tool flight circle 40 mm below table level: 93 - 200 mm
Tool flight circle 55 mm below table level: 93 - 180 mm
Tool flight circle for straight cutter heads max. 163 mm
Max. tool diameter behind stop level: 180 mm
Max. throat depth: 35 mm
Axial adjustment range: 55 mm
Spindle axially and radially CNC controlled
3. Tool holder - PowerLock - left
-----------------------------------------------
Motor with brake: Shared motor with the 2nd spindle
Speed including high-performance ball bearings: 8,000 rpm
Tool flight circle 40 mm below table level: 93 - 200 mm
Tool flight circle 55 mm below table level: 93 - 180 mm
Tool flight circle for straight cutter heads max. 163 mm
Max. throat depth: 35 mm
Axial adjustment range: 55 mm
Spindle axially and radially CNC controlled
4. Tool holder - PowerLock - top
-----------------------------------------------
Motor with brake: 7.5 kW
Speed including high-performance ball bearings: 8,000 rpm
Tool flight circle: 93 - 200 mm
Tool flight circle for straight cutter heads max.: 180 mm
Max. throat depth: 35 mm
Axial adjustment range: 40 mm
Spindle radially CNC controlled
Divided pressure shoe in front of the upper tool holder, on the tool flight circle
adjustable and swings away from the tool, spring-loaded.
Pressure shoe in front of, and discharge after, the upper spindle with electronic
Digital displays, integrated in the memory function or the PowerCom
Glazing bead removal to the upper spindle, pneumatically controlled back and forth
including stops on the right spindle recessed to 35 mm for square
Groin removal
5. Tool holder - PowerLock - below
-----------------------------------------------
Motor with brake: 7.5 kW
Speed including high-performance ball bearings: 8,000 rpm
Tool flight circle: 93 - 200 mm
Max. throat depth: 15 mm
Axial adjustment range: 35 mm
Spindle radially CNC controlled
Feed system
-----------------------------------------------
Electronic feed, steplessly adjustable with brake: 4 kW, 5 - 30 m/min
Feed roller in front of the 1st lower tool is pneumatically controlled up/down.
Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning.
Adjustment path of the feed rollers relative to the left tool holder, axial 35 mm
Extension of the pendulum axis compared to the left spindle to 150 mm
Reduction of the feed roller distances to 465 mm,
including additional feed rollers after the upper tool holders
and shortened roller spacing
Machine electrics
-----------------------------------------------
Operating voltage 400 V (voltage range 380 - 420 volts), 50 Hz.
All spindle IE 2 version
Electrical design according to DIN VDE 0113, electrical equipment from
Industrial machines EN60204, IEC-204-1. Other electrical regulations are
not taken into account.
Machine stands, tables and stops
-----------------------------------------------
Dressing table: 2500 mm long (including joining ruler)
Manual Waxilite pump for table resin removal
A powered rubber roller in the discharge table - 50 mm wide
Printing elements and guides
-----------------------------------------------
Two side pressure rollers in front of the left tool holder, rotating and
sprung.
Lateral pressure roller on the infeed table, spring-loaded
Exhaust plate for narrow glazing beads (20 degrees inclined)
Machine operation
-----------------------------------------------
Control: MemoryPlus
To save the setting values of profiles.
Tool holder axes with electronic digital displays.
Graphical representation enables intuitive operation
4 x axial CNC-controlled adjustment and positioning of the tool holders
in conjunction with the memory function for tool holders 2,3,4,5
4 x radial CNC-controlled adjustment and positioning of the tool holders
in conjunction with the memory function for tool holders 2,3,4,5
CNC - controlled adjustment and positioning of the feed
high/low in connection with the memory function
Lubrication points for axial tool holder adjustment.
Central location of lubrication points on the front of the machine.
Safety and soundproofing
-----------------------------------------------
Full safety fairing
Electromagnetic locking of the safety hood
Interior light
Option:
Complete tools for planing, strip separation and profiling
(Technical information according to the manufacturer - no guarantee!)