Sheet

 Return    Print

Technical details

Additional information

Cutting section max. mm. 420x150/ 520x100 / 590x50.

Structure completely in varnished hard steel, high thickness and really strong.
Solid anchoring to the floor with special flanged steel feet with fixing hole.
Two-handed safety manual control with ergonomic position.
Blade motor power kW 9,2 equipped with soft starter device.
Tilting cut movement managed by power transmission system with belts.
Cutting speed adjustable by pneumatic trimmer on the machine.
System to balance the cutting group weight giving long life.
Special amortizing system.
Independent pneumatic regulations to adapt to the different types of work.
Aluminium blade soft inserts of long duration and easy to change.
Including circular blade in HM, diameter mm. 600. Z=108.
Upper pneumatic hood to block the pieces with electro-pneumatic management.
Pressure beam movement system through 4 new sliding bearings with double anti-
dust protection and automatic lubrication.
Heavy duty machine top equipped with galvanized idle rollers (load capacity Kg
600), diameter mm 89, width mm 500.
Electrical equipment according to CE standards.
CE models must be absolutely completed with in-feed and out-feed tables with
minimum one meter of length

Blade motor power kW 9,2
Diameter of saw blade included 600 mm
Blade type HM Z=108
Saw spindle rotation speed 2750 rpm
Air consumption per cycle 7 Nl
Sawdust extraction 2 x 140 mm
Compressed air supply pressure 6 - 8 bar
Voltage V 400/50 Hz 3-fase
Working height 900 mm +- 20 mm
Colour Ral 7035 - Ral 1007


(technical details according to manufacturer - without guarantee!)