|
Liste actuelle du stock
|
Votre spécialiste avec longue expérience et compétence en vente et achat de
- Installations de machines d´usinage de fenetres et machines de production de fenetres en bois, en matière plastique et en aluminium: nouvelles et d`occasion
- Machines relatives à la fabrication et la élaboration du bois des producteurs notables comme Weinig, SCM, Homag, Altendorf, Panhans, Ott etc.
|
contact
used and new machines: Herr Florian Engelfried Tel.:+ 49-7361-986614 Fax: + 49-7361-8431 info@engelfried.com
|
Nous vous offrons
- Présentations (démonstrations) et formations dans notre halle d´exposition ainsi que mises en service des installations dans le pays ou à l´étranger par nos monteurs et notre personnel de formation
- Dénouements complets des liquidations d´entreprises
- Soutien professionnel et résultats satisfaisants en matière de liquidations d´entreprises et cessations d´opérations
Notre équipe de service vous assiste bien après votre achat !
|
New category machine videos
Please note our new section machine videos. Here you find all our current videos of our machines.
Of course you can find these movies also in the machine database under the appropriate stock number.
The video files are located always at the end of the machine descriptions. Enjoy watching - your Engelfried Maschinentechnik!
|
Notre offre actuelle
Description de l´offre:
# 5347 window production line Weinig Unimat 23 EL, Weinig Unicontrol 10 CNC
Prix:
€ price on request!.-
Notre offre vous intéresse?
Veuillez bien nous contacter sous les coordonnées indiquées en-dessous:
+49 (7361) 9866-0
|
Description de machine:
# 5347 window production line built in 2000, consisting of:
-------------------------------------------------------------------------------------------------------------
Position 1 - Weinig Unimat 23 EL/009, fourside moulder
-------------------------------------------------------------------------------------------------------------
Machine with 6 spindles:.
1. spindle botom: 7,5 kW, 8.000 rpm
2. spindle right: 7,5 kW, 8.000 rpm
3. spindle left: 7,5 kW, 8.000 rpm
4. spindle top: 7,5 kW, 8.000 rpm
5. spindle bottom: 7,5 kW, 8.000 rpm
6. spindle top: 7,5 kW, 8.000 rpm
- working width: 230 mm
- working height: 130 mm (clamping length of vertical spindle 170 mm)
- feed speed variable adjustable 4 - 24 m/min
- feed engine 4 kW
- straigthhenning table length 2,5 m
- spindle diameter 40 mm
- spindle turnings 8000 UpM
- 2., 4. and 6. spindlel axial pneumatically clocked
- glazing bead support after 6. spindle pneumatically clocked
- adjustment distance of feed roller in opposite of left spindle 150 mm
- short piece package including shortenned roller distance
- width and thickness adjustment for spindle 3., 4. 6 automatically
- central lubrication
- stop height after right spindle 35 mm
- machine with better closet and interior light
Position 2 - back transport system RF 15
-------------------------------------------------------------------------------------------------------------
For the back transport of the work pieces to operator after moulding
Position 3 - Weinig Unicontrol 10 with axial and radial CNC-spindles,
-------------------------------------------------------------------------------------------------------------
with following aggregates:
1. cut-off saw with laserlight
engine 3 kW, spindle diameter 40 mm, spindle turning 2800 UpM, tool flying cycle 400mm, adjustment axial through NC-axis, adjustment radial pneumatically on 8 positions
2. spindle, aggregate from bottom side for corner roundings
engine 1 kW, spindle diameter 20 mm, spindle turningsl 9000 UpM, tool flying cycle 120 mm, tool clamping length 13 mm, adjustment axial with cut-off saw, adjustment radial pneumatically on 2 positions.
3. tenoning spindle
engine 15kW, spindle diameter 50 mm, spindle turnings 2925 UpM, tool flying cycle 400 mm, tool clamping length 640 mm, adjustment axial CNC-axis, adjustment distance axial 580 mm, adjustment speed 100 mm/sec., 4-times counter fixed on tenoning table
4. 1st profiling spindle
engine 11 kW, spindle diameter 50 mm, spindle turnings 6000 UpM, tool clamping length 400 mm with counter bearing, adjustment axial and radial through CNC-axis
5. 2nd profiling spindle
engine 11 kW, spindle diameter 50 mm, spindle turnings 6000 UpM, tool clamping length 400 mm with counter bearing, adjustment axial and radial through CNC-axis
6. profiling aggregate horizontal top
engine 3 kW, spindle diameter 40 mm, spindle turnings 5850 UpM, tool flying cycle 130 mm, adjustment pneumatically on 8 positions axial and radial
5. 3rd profiling spindle
engine 11 kW, spindle diameter 50 mm, spindle turnings 6000 UpM, tool clamping length 400 mm with counter bearing, adjustment axial and radial through CNC-axis
8. profiling aggregate (fitting spindle) vertical right at machine end for 3 tools
engine 3 kW, spindle length 160 mm, spindle diameter 40 mm, spindle turnings 5850 UpM, adjustment pneumatically on 8 positions axial and radial
9. profiling aggregate horizontal bottom,
engine 3 kW, spindle diameter 40 mm, spindle turnings 5850 UpM, adjustment pneumatically on 8 positions axial and radial, diving control vor variable divings
- length stop cnc-controlled, fixed on tenoning table for lengthes up to 3500 mm, studio window equipment 60° tiltable to both sides with display on PC
- double piece package with automatic singelling of work pieces and transport into profiling unit.
- feed rollers are axial clocked in the area of 3rd profiling spindle for narrow and short pieces.
- electronic height adjustment of feed
- spross support automatically clocked
- equipped for the outide proiling of pressed sashes including equipment for small sashes
- table plate clocked to tool diameter, 2 positions
- aircondition unit in electronic box
- central lubrication manual
- PC-control NEXUS
- automatic turning system of workpieces with lamella belt
(technical details according to manufacturer - without guarantee!)
|
|
|
