Witamy w firmie Engelfried Maschinentechnik

Nasza aktualna oferta

Opis oferty:
SCM WINDOR 40 R with 2 tenoning spindles + 11 kW electro spindle with tool changer

Cena:
€ price on request.-

Jestescie Panstwo zainteresowani, napiszcie nas.

Albo zadzwoncie do nas:
+49 (7361) 9866-0

Opis maszyny:
SCM WINDOR 40 R with 2 tenoning spindles + 11 kW electro spindle with tool changer
--------------------------------------------------------------------------------------------------

Pos. 1: cut-off saw
-------------------------------------------------------------------------
- engine 4 kW
- spindle turning 3.000 U/min
- diameter 40 mm
- max. tool diameter 400 mm, boring 80 mm

Pos. 2: tenoning spindle Nr.1
-------------------------------------------------------------------------
- high precision spindle with counterbearing support
- 620 mm length, diameter 50 mm
- engine 11 kW
- turnings 3.000 U/min
- Max. tool diameter 370 mm
- 575 mm. axial stroke under worktable level
- automatic anti-splintering device Jolly
- vertical positionning with free programmable axis

Pos. 3: Power 2000: electro spindle 11 kW HSK 63 F
-------------------------------------------------------------------------
with Rapid tool changer for max. 24 tools

Pos. 4: tenoning spindle Nr.2
-------------------------------------------------------------------------
- high precision spindle with counterbearing support
- 620 mm length, diameter 50 mm
- engine 11 kW
- turnings 3.000 U/min
- Max. tool diameter 370 mm
- 575 mm axial stroke under worktable level
- automatic anti-splintering device Jolly
- vertical positionning with free programmable axis

Pos. 5: profiling spindle Nr. 1
-------------------------------------------------------------------------
- 320 mm length, diameter 50 mm
- engine 7,5 kW
- turning 6.000 U/min
- min./max. tool diameter 130-240 mm
- 280 mm axial stroke under worktable level
- vertical positionning with free programmable axis
- horizontal positionning pneumatically ON/OFF with 5 times revolver stop
- Right / left turning
- Synchronization function of immersion for rip-off free stormproofing

Pos. 6: profiling spindle Nr. 2
-------------------------------------------------------------------------
- 320 mm length, diameter 50 mm
- engine 7,5 kW
- turning 6.000 U/min
- min./max. tool diameter 130-240 mm
- 280 mm axial stroke under worktable level
- vertical positionning with free programmable axis
- horizontal positionning with free programmable axis

Pos. 7: profiling spindle Nr. 3
-------------------------------------------------------------------------
- 320 mm length, diameter 50 mm
- engine 7,5 kW
- turning 6.000 U/min
- min./max. tool diameter 130-240 mm
- 280 mm axial stroke under worktable level
- vertical positionning with free programmable axis
- horizontal positionning with free programmable axis

Pos. 8 top: glazing bead saw
-------------------------------------------------------------------------
- diameter 30 mm; length 30 mm
- max. tool width 22 mm
- engine 3 kW
- turning 6000 UpM
- saw blade diameter max. 220 mm
- glazing bead holder unit and support

Pos. 8 bottom: bottom horizontal spindle
-------------------------------------------------------------------------
- diameter 40 mm, length 130 mm
- engine 3 kW
- turnings 6000 UpM
- autom. brake
- Min/max tool diameter 170-230 mm
- axial stroke 120 mm
- vertical positionning with free programmable axis
- horizontal positionning with free programmable axis

More features:

Interpolating ROTATEN for 2 tenoning spindles
-------------------------------------------------------------------------
Device for automatic execution of 60 degrees +/- slanting tenons
- 15 hp (11 kw) motor for b.d.head
- 370 mm. max. tool diam. on b.d.head
- hardware and software modifications

work piece back transport system RP W 40
-------------------------------------------------------------------------
heavy builded

"CONTROL 100 PC"
-------------------------------------------------------------------------

CONTROL 100 PC is a control unit organized on two levels. The first level is the numerical control (PLC) which formulates the operations for the control of the machine. The second level is a personal computer which co-ordinates all communications with the PLC and serves as an interface not only between operator and machine but also between any external units for data elaboration. "NEXT", a supervisor developed by SCM for the complete control of machines and programmable systems with continuous electronic axes, is installed on the personal computer. This system enables working data to be kept resident in memory and to be called up when required by digiting the corresponding name on the keyboard. Head units equipped with continuous electronic axes are positioned according to work program. Keyboard can be used to delete or alter work programs in an extremely easy way as well as to correct tool positioning. A network card (optional) enables connection to external peripherals (data processing or other personal computers) for exchange of working data (software for exchange of information is not however included in standard equipment of control). The machine is standardly equipped with tele assistance (Telesolve) which, through the modem of the personal computer, enables connection to "trouble shooting" ISDN phone line connected to the SCM technical assistance service.

MULTI-AXIS CONTROL UNIT
The personal computer has the following hardware specifications:
- PC PENTIUM 400 MHZ
- 128 KByte Cache
- 64 MB RAM
- floppy disk 1,44 MByte
- CD-ROM 32 X
- video display 15" CRT SVGA-AGP colours
- hard disk 4,3 GB
- mouse
- two 232, USB, PS2 serial links
- parallel gate

TECHNICAL SPECIFICATIONS
-------------------------------------------------------------------------

Minimum workpiece length (inside of tenon): 200 mm
Maximum working length (based on length stop): 3.200 mm
Minimum working width: 40 mm
Maximum working width: 200 mm
Min. workpiece thickness: 30 mm
Max. workpiece thickness: 130 mm

Video shows same modell

(technical details according to manufacturer - without guarantee!)